Description
The HeyGears Reflex easily offers the easiest and simplest printing experience to date. So do yourself a favor and get the Reflex to save your valuable time and money in the long run.
Why do we choose the HeyGears Reflex SLA resin 3D printer?
- Easy initial setup.
- The build quality is top-notch.
- Extremely user-friendly. Pretty much straight-up slice and print.
- Everything related to the printing process is automated including an automatic resin tank filling until the print is finished.
- All that’s left to do is clean and cure the print(s) using the included washer and curer.
- The print quality is incredible, of course, it’s resin printing after all.
DDW’s Preferred SLA 3D Resin
- ABS-Like PAU10 62°C easy to print.
- High-Temp PAH10 110°C high temperature resistant.
- Transparent PAT10 62°C 88% clear.
Workflow
- Load resin bottle.
- Open Blueprint Studio.
- Choose resin.
- Load 3D model(s).
- Hit “One-Click Slice” which will automatically repair, orient, support, layout, and slice. (Manual choices available.)
- Send it to print wirelessly. (USB drive printing available.)
- Hit print.
- Remove the model(s), wash, and then cure.
- Done!
- Keep printing…
Pro Tips
- You can refill the Reflex resin bottle with Sunlu ABS-Like or Sunlu High-Temp resin using PAU10 settings at 50µm for printing.
- PAP10 settings at 50µm or 30µm also work for ABS-Like resin printing.
- Use a heat gun to soften the supports to make them easy to remove.
- Other than that, replace the FEP film from time to maintain print quality.
Don’t need the washer and curer?
HeyGears Reflex without washer and curer $1,399.00
HeyGears resin and accessories
Resin part processing accessories
We have been using this printer since 7/20/2023.
- Issue: NONE
Come back again to check for more updates as we continue to put this printer to work. 💯
